6 Warning Signs That Your Water Well Is Going Dry

Do you rely on a household well for your water supply? If so, you must take the time to monitor it regularly. All too often, our wells can go dry without us even realizing it until it’s too late – leaving us scrambling for alternative sources of clean water. 

To help keep this from happening to you, we’ve outlined in this blog post the six warning signs that your well may be running out of water and what preventative measures you should take if they arise. 

Read on to ensure you’re staying one step ahead when keeping your household water source safe and accessible.

1. Decrease in Water Pressure

A noticeable decrease in water pressure could be one of the first indicators that your well is running low on water. If you find that the pressure has dropped when you turn on your taps, or your shower isn’t as powerful as it once was, it could be a sign of a dwindling water supply in your well. 

It could occur due to lower water levels resulting in less pressure to push the water up and out of your well, or it could also be due to sediment build-up in the well from the lower water levels. Regularly monitor your household water pressure, and if you notice a significant change, it’s time to call in a professional for a well inspection.

2. Cloudiness or Discoloration in the Water

Any unusual cloudiness or discoloration in your water could signify a problem with your well. Often, these changes are due to sediment or mineral build-up in the well system. It typically happens when the water level gets low, and the well starts pulling in more sediment from the bottom or sides of the well.

As a result, your water might appear cloudy, discolored, or have a strange taste or smell. Keep a close eye on the quality of your water, and if you notice any changes, don’t hesitate to contact a professional to have your system checked out.

3. Increase in Water Temperature

A sudden or gradual increase in your water’s temperature could be a warning sign of a failing well. It could occur if the well is running shallow and drawing in warmer water from shallower depths. Additionally, a temperature rise could indicate a failing well casing. 

The casing isolates the well water from the surrounding earth and its heat. If the casing is deteriorating, it might allow warmer earth temperatures to affect the well water. If you notice your water becoming noticeably warmer, it’s important to seek professional help to evaluate your well’s condition.

4. Unusual Odors Coming from the Faucet

Detecting a strange smell coming from your water can be alarming and is one of the significant warning signs that your well might be running dry. It can be due to sulfur gasses seeping into the groundwater, especially as the well starts drawing from deeper and potentially more mineral-rich levels. 

The common manifestation could be a rotten egg smell, indicating the presence of hydrogen sulfide gas. It’s crucial to not ignore these changes and immediately contact a good well professional. 

Although this gas may not always pose health risks, it’s a clear sign that your well is struggling and requires attention.

5. Visible Dry Spots Around the Property

If you begin to notice dry patches or spots on your property where there was once regular water flow, this could be a sign that groundwater levels are dropping and your well is going dry. 

These dry spots might manifest around areas where your property typically drains well or where there has been regular rainfall in the past. 

A well relies on groundwater, and if the groundwater levels decrease due to a lack of rain or other factors, it can directly impact the water supply in your well. If you start noticing such changes in your property, it’s advisable to contact a professional to assess the situation.

6. Sudden Appearance of Bugs Near Faucets

A sudden influx of insects or bugs near your faucets can be a disconcerting sign that your well might be running dry. 

It could be due to an inadequate seal on your well, allowing bugs to gain access inside. The bugs are drawn to the moisture and can make their way into your water supply through cracks or gaps in the well seal. 

It indicates a potential low water supply problem but also poses a health risk due to possible contamination. If you observe this sign, it’s important to call a well professional to have your system inspected and the seal repaired if necessary.

In Conclusion 

It is key to maintain a regular maintenance schedule to avoid repairs or even replacements in the future. Keep an eye out for any of the signs listed above as these could be indicators that something is wrong with your well system.

 It is best to contact a professional immediately if you see or experience anything unusual with your water supply since it can turn out to be more serious than it seems. Don’t let the uncertainty put you off from calling and keeping your well system operating at peak performance; after all, access to clean and reliable water depends on having a safe and efficient well system.

Investing in preventive maintenance for your home’s water supply today can save you time, money, and trouble down the road. So don’t wait – give us a call today and we’ll help provide you with a long-term solution that meets your needs!

About John’s Well Drilling

Are you looking for experienced and efficient well-drilling services near you? Professionals at John’s Well Drilling have over 40 years of experience in the industry. We are Delaware’s leading well drilling and servicing company. 

We are accredited by the Better Business Bureau and licensed to conduct well drilling and installation of geothermal systems. Our services include well drilling, well pump installation, pump repair, and replacement, tank replacements, well servicing geothermal drilling, and agricultural wells. To get free quotes for our well maintenance services, don’t hesitate to contact us at 302-734-2211 or fill out our convenient contact form.