How to Tell if Your Pump Pressure Switch is Not Working Properly?

You have just returned from a long day at work and are looking forward to a hot shower to take off all that stress. But when you step into the shower, the water suddenly stops. Mostly the issue faced by domestic well owners is a broken pump pressure switch. A pump pressure switch is a crucial component in your well system, so you need to quickly call a professional. However, while you search for well drilling contractors near me, you can pinpoint if the reason for your water flow ceasing is a pump pressure switch.

Follow the steps below to tell if your pump pressure switch is not working properly-

Signs of a Damaged Pump Pressure Switch-

Before we head to learn how to detect a pump pressure switch that is not working properly, you may want to look for these signs while waiting for well drilling services. However, it is crucial to note that these signs can be due to some other issue as well. Here are some signs of a broken pump pressure switch-

• The pump does not switch on.
• The pump is stuck in a continuous cycle.
• The water pressure you receive is lower than expected, even though the pump is functioning.
• The pump does not kick in at the cut-in pressure.

How to Tell if Your Pump Pressure Switch is Not Working Properly-

Step #1- Switch off the power: In order to troubleshoot your well system, the first step is to switch off the power so you can safely access it. It is an essential step as you don’t want to touch a live wire while holding an underground water pipe. You can simply flick the switch at your circuit breaker or entirely remove the circuit breaker to switch off the power.

Step #2- Unscrew the well switch: You can find the well switch connected to the pump or pipe supplying the pressure tank. Unscrew the top screw cap to uncover the pump. You might need plumbing pliers for this.

Step #3- Check for any leaks: If you see any leakages in the pump, it means something is wrong. If there is an internal leakage, you should call a water well service near you to handle this complex issue.

Step #4- Investigate the contacts: The contacts can rust over time and break off from the pump. Check if any connections are damaged and replace them. If the water pressure does not increase, you may want to contact well drilling services near me to repair them.

Step #5- Allow the pump to cycle: Turn the power back on, let the pump run a complete cycle, and see if the pressure increases. If not, contact well maintenance services to replace the internal spring.

About John’s Well Drilling

Are you looking for experienced and adept well drilling services near you? Professionals at John’s Well Drilling have over 40 years of experience in the industry. We are Delaware’s leading well drilling and servicing company. We are accredited by the Better Business Bureau and licensed to conduct well drilling and installation of geothermal systems. Our services include pump repair and replacement, tank replacements, well servicing, geothermal drilling, water well service, and agricultural wells. Call us at 302-734-2211 or fill out our contact form to get a free quote.